StorCase Technology DS500 - Manual (Page 59)

Appendix C Software Features 55
RemotaSilo User’s Guide - Rev. B00 Kingston Technology Company
•
The number of installed power supplies in each RemotaSilo
chassis.
•
The number of RAID controllers installed in each RemotaSilo
chassis (0 or 1).
Options / Pager Setup
This command allows the user to setup operator paging parameters for
RemotaSilo warning and alarm conditions.
To set the Paging parameters:
1. Enter a valid telephone number where the Host software can
page the operator. Use a comma for a 0.5 second delay, if
necessary.
2. Enter the port number for the modem attached to the Host
computer.
3. Check the Enabled option.
4. Click
OK to save paging parameters.
The Enable option allows paging to be temporarily disabled, (by un-
checking the option) without losing the paging parameters.