StorCase Technology DS500 User Manual

Page 65

Text mode
Original mode

Appendix C Software Features

RemotaSilo User’s Guide - Rev. B00

Kingston Technology Company

Advanced / Setup SNMP

This command controls the interface between the RemotaSilo host
software and the RemotaSilo SNMP interface software.

Check Enable service to enable the RemotaSilo SNMP interface.

Click OK to save the SNMP setting.

If the SNMP service has been restarted, the Reset button must be used
to re-establish the interface.

(The Configure button is reserved for future software revisions,
and is intended to accommodate unique operating system
requirements.)

Please refer to Appendix D, “Simple Network Management
Protocol (SNMP) Setup”, for a more detailed description of the
RemotaSilo SNMP interface sofware installation and usage.