StorCase Technology DS500 - Manual (Page 10)

6 Introduction
Kingston Technology Company RemotaSilo User’s Guide - Rev. B00
In the event that system environmental parameters have reached a pre-
defined warning or alarm level, or upon detecting a drive failure, the
RemotaSilo will log the information in nonvolatile memory while also
sending this information to a PC configured as the RemotaSilo host.
The host PC can also be programmed to respond to the alarm or
warning signals by paging, faxing, or e-mailing the system manager
with the cause of the alarm or warning. The monitoring software can
also be run from a remote PC through Windows NT or 95 operating
system, or with the use of third-party software, such as
Norton
pcANYWHERE ™ for remote screen control of the host PC.
RemotaSilo supports SES, SAF-TE and SNMP protocols (SNMP
interface requires Windows NT).
Package Contents
In addition to the purchased Data Silo DS500 chassis and the
corresponding DS500 User’s Guide, the RemotaSilo upgrade should
include the following items:
q RemotaSilo integrated circuit board
(factory installed into the DS500 chassis)
q 6’ asynchronous serial cable with two DB-9 connectors
q 8-bit internal SCSI cable (for SES or SAF-TE connection)
q RemotaSilo monitoring software (one 3.5” floppy diskette)
q RemotaSilo User’s Guide
If any of the items are missing or damaged, contact your Kingston
dealer for a replacement.