Spectrum Controls 140 ACI 051 00sc User Manual
Page 42

Installation Instructions
32-Channel Analog Input Module
Quantum Series 140 AxI 05x 00sc
37
Chapter 6
APPLICATION NOTES
6.1
General Application Tips
•
Select the appropriate 140 AxI 05X 00sc from the I/O map
selection screen.
•
Configure the module using your programming software, make
appropriate use of Configuration and Status registers as outlined
in Chapters 2 through 4.
•
Ensure correct units of measure are selected for data type.
•
Use the lowest filter frequency setting possible for your applica-
tion, this ensures the most stable and accurate readings.
•
Configure the 4x Register.
•
Check that the Green Ready LED is lit when the module is
powered up and has completed its self test.
•
Check that the Green Active LED is lit when data is being
transferred to the Quantum CPU.