Spectrum Controls 140 ACI 051 00sc - Manual (Page 32)

Installation Instructions
32-Channel Analog Input Module
Quantum Series 140 AxI 05x 00sc
27
3x+8 Configuration Error: Bit 10
An illegal configuration was attempted. When this occurs configuration
will not be accepted by the module and this flag will be set. By using 4x
register bits 1 and 2 to set the module to “status” individual channels
flags can be checked to determine which channel or group is incorrect.
3x+8 Data Input Mode: Bits 11, 12
The module continuously outputs a group of eight registers worth of data.
The data for a given group can be paged between three modes. These
are the standard channel input data, channel status data or Time stamp
data.
Page Bit 11 Bit 12 Input Modes
0 0 0 Data
1 0 1 Status
2 1 0 Time Stamp
3x+8 Group Select: Bits 13-16
These four bits echo the selected channel group.
Bit 13 Bit 14 Bit 15 Bit 16 Group
0 0 0 0 Channels 1-8
0 0 0 1 Channels 9-16
0 0 1 0 Channels 17-24
0 0 1 1 Channels 25-32