SpectraCal CalMAN 3D LUT Software Files - Manual (Page 7)

3528 Bagley Ave. N. Seattle, WA 98103 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
The Foundry Nuke:
1. In the CalMAN AutoCal Setup dialog, select the File Format to be 3DL, select the Output Cube
Size to be 32 Points, and name your LUT in the File Path dialog.
2. When the CalMAN AutoCube calibration process is complete, copy the .3dl LUT file to a folder
on your editing computer.
3. In Nuke, to select the LUT to use when reading or writing an image, double-click to open the
Read or Write node’s properties panel.
4. From the Colorspace dropdown menu, select the .3dl LUT file you created.