SpectraCal VirtualForge Software - Manual (Page 2)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com

* Blackmagic UltraStudio Mini Monitor Thunderbolt™ 3G-SDI and HDMI output device

* Blackmagic Intensity Extreme Thunderbolt™ 3G-SDI and HDMI I/O device ??

* Blackmagic DeckLink 4K Extreme 12G PCIe Dual Link 12G-SDI, HDMI and analog I/O device

* Blackmagic DeckLink 4K Extreme PCIe Dual Link 6G-SDI, HDMI and analog I/O device

* Blackmagic DeckLink Studio 4K PCIe 6G-SDI /HD-SDI, HDMI and analog I/O device

* Blackmagic DeckLink SDI 4K PCIe SDI/HD-SDI I/O device

* Blackmagic DeckLink Quad PCIe SDI/HD-SDI I/O device

* Blackmagic DeckLink Optical Fiber PCIe SDI/HD-SDI I/O device

* Blackmagic DeckLink Duo PCIe SDI/HD-SDI I/O device

* Blackmagic DeckLink SDI 4K PCIe 6G-SDI I/O device

* Blackmagic DeckLink Mini Monitor PCIe 3G-SDI and HDMI output device

* Blackmagic Intensity Pro 4K PCIe HDMI I/O device
* CalMAN support for DeckLink SDI outputs, for sourcing VirtualForge calibration signals, is
limited to the DeckLink default YCrCb 4:2:2 10-bit pixel format, which the DeckLink control app
does not provide the option of changing.
CalMAN does not support DeckLink HDMI outputs for sourcing VirtualForge calibration signals.
The DeckLink HDMI outputs are range-compressed to SMPTE-legal levels, which CalMAN cannot
disable.
AJA Driver Requirements:

Version 10.6.x Hardware Driver

AJA 12.x driver versions are not compatible with CalMAN
Blackmagic Design Driver Requirements:

Version 10.4 Desktop Video
NOTES: Before launching the VirtualForge software-
1. Be sure to install the proper driver for the AJA or BMD output device.
2. Set the AJA or BMD output device format to something other than 480i (NTSC) or
576i/625i (PAL). VirtualForge is not compatible with these formats.