Rocktron MIDI Raider - Manual (Page 49)

46
COPY, Page 2 of 4 - Bank Copy
The second page of the COPY program, Bank Copy, allows for an entire
bank of presets to be copied from one bank location to another.
When the MIDI Raider is configured to bank by 5 presets at a time:
• Bank Copy will copy 5 presets
• Bank 1 = Presets 1-5
Bank 2 = Presets 6-10
Bank 3 = Presets 11-15
...and so on
If configured to bank by 10 presets at a time:
• Bank Copy will copy 10 presets
• Bank 1 = Presets 1-10
Bank 2 = Presets 11-20
Bank 3 = Presets 21-30
...and so on
If configured to bank by 15 presets at a time:
• Bank Copy will copy 15 presets
• Bank 1 = Presets 1-15
Bank 2 = Presets 16-30
Bank 3 = Presets 31-45
...and so on
To copy a bank of presets to another bank location:
() With the 2nD l.e.D. still lit, press the "" switch to access the
next page of the copy program, Bank Copy. (If the MIDI raider is
not already in the COPY editing mode, press “2nD”, then “COPY”,
followed by “".)
() Use the "InC" and "DeC" switches directly below the displayed
bank to be copied to select the desired bank.
() Use the "InC" and "DeC" switches directly below the displayed
bank destination to select the desired bank location to copy to.
() Press the "CTr sTOre" button to initiate the copy.
Note:
If the MIDI Raider is
configured to bank by
one preset at a time (see
SETUP, Page 2), this page
is not available.
