Rocktron MIDI Raider - Manual (Page 29)

26
SETUP, Page 9 of 10 - Memory
Reinitialization (All Presets)
The ninth page of the seTUP program, Memory Reinitialization,
allows for the restoration of the entire MIDI raider memory to its
original factory settings. This procedure will erase all modifications
that the user has made to the MIDI raider since it was shipped from
rocktron. The code number “230” must be selected to activate the
initialization process.
To Reinitialize the MIDI Raider memory:
() With the 2nD l.e.D. still lit, press the "" switch to access
the ninth page of the seTUP program, Memory Reinitializa-
tion. (If the MIDI raider is not already in seTUP mode, press
“2nD”, then “seTUP”, followed by “" eight times.)
() To access the proper code number to activate the reinitializa-
tion, use the "InC" and "DeC" switches directly below the
code number currently displayed.
Pressing the STORE switch at this time will erase the MIDI
Raider and return it to its original condition as shipped from
the factory. All erased data will be unrecoverable.
() Once the proper code number ("230") is selected, press the
"sTOre" switch to reinitialize the entire MIDI raider memo-
ry.
() If desired, a code of "231" can be entered to reinitialize only
the MIDI raider controller information for the instant access
switches and pedals. entering a code of "231" will reinitialize
only the following information:
Global/Per Preset status;
MIDI channel;
Control number;
On value;
Off value;
Switch type status;
On/off status
!
WARNING!
The Memory Reinitialization
feature will erase the entire
memory of the MIDI Raider
and return it to its original
condition as shipped from the
factory.
Once the STORE button is
pressed, all erased data will be
unrecoverable!
!