Setup, page 5 of 10 - naming midi channels – Rocktron MIDI Raider User Manual
Page 21
18
SETUP, Page 5 of 10 - Naming MIDI Channels
The fifth page of the SETUP program allows for custom 4 character
abbreviations to be shown in place of MIDI channels and instant
access switches during editing. assigning a name to each MIDI
channel can make it considerably easier to remember which MIDI
devices are assigned to particular MIDI channels. This is also true of
instant access switches.
To assign a name to a MIDI channel or instant access switch:
() With the 2nD l.e.D. still lit, press the "" switch to access
the fifth page of the SETUP program. (If the MIDI Raider is
not already in seTUP mode, press "2nD", then "seTUP", fol-
lowed by "" four times.)
() To select a MIDI channel or switch to name, use the "InC"
and "DeC" switches directly below the currently selected
MIDI channel/switch to scroll through the available selections.
() Use the "InC" and "DeC" switches directly below the center
of the display to select the desired character for the current
position.
() Use the "InC" and "DeC" switches directly below the right
side of the display to advance to the next character position to
edit.