Midi, page 7 of 7 - midi receive channel – Rocktron MIDI Raider User Manual
Page 45
42
MIDI, Page 7 of 7 - MIDI Receive Channel
The seventh page of the MIDI program, MIDI Receive Channel, determines
the MIDI channel that incoming program changes must be on for the MIDI
raider to respond. (This feature is operable only in Bank Mode - see SETUP,
Page 1).
To define the MIDI receive channel:
() With the 2nD l.e.D. still lit, press the "" switch to access the next
page of the MIDI program, MIDI Receive Channel. (If the MIDI raid-
er is not already in the MIDI editing mode, press “2nD”, then “MIDI”,
followed by “" six times.)
() Use the "InC" and "DeC" switches directly below the displayed MIDI
receive channel to select the MIDI channel that the MIDI raider is to
receive MIDI commands on.