Midi, page 6 of 7 - program mapping – Rocktron MIDI Raider User Manual
Page 43
40
MIDI, Page 6 of 7 - Program Mapping
This page allows for incoming program changes to be mapped to MIDI raider
presets when the Program Change status is set to “MaP” (see MIDI, Page5).
This feature is only available when operating the MIDI raider in Bank Mode.
To assign the program mapping status:
() With the 2nD l.e.D. still lit, press the "" switch to access the next
page of the MIDI program, Program Mapping. (If the MIDI raider is
not already in the MIDI editing mode, press “2nD”, then “MIDI”, fol-
lowed by “" five times.)
() Use the "InC" and "DeC" switches directly below the displayed Pro-
gram Change number to select the desired Program Change number to
be mapped to an MIDI raider preset.
() Use the "InC" and "DeC" switches directly below the displayed preset
number to select the MIDI raider preset that the displayed program
change number will be mapped to.