Martin Christ RVC 2-25 CDplus - Manual (Page 50)

RVC 2-25 CD&
6 Operation
50
Version 11/2008, Rev. 2.2 of 04/12/2013 • sb
Translation of the original operating manual
Service menu
Fig. 45: Service menu
Rotor information
This function is not supported by this type of unit.
CD
plus
configuration
In this menu, accessories (options) have to be configured:
• Vakuum sensor
• Remote control cold trap
• Air injection
• Triple TMM (not available for all RVC types)
• Imbalance detection (not available for all RVC types)
NOTE
• If an option is installed, it has to be activated with "yes".
• If the option is not installed, it has to be deactivated with “no”.
Load default settings
All set values and parameters are reset to the delivery status of the RVC.
The reset requires confirmation.
Extended service menu
The extended service menu is exclusively reserved for service engineers.
This area is password-protected and not available to the user.
Pos: 153 /01 0 Univ ersal mod ule/ Ab schnitt swechs el @ 0 \mo d_1 202 124 514 062_ 0.d ocx @ 418 @ @ 1
Pos: 154 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1