Martin Christ RVC 2-25 CDplus - Manual (Page 37)

RVC 2-25 CD&
6 Operation
Version 11/2008, Rev. 2.2 of 04/12/2013 • sb
37
Translation of the original operating manual
Pos: 134 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /06 0 Betri eb/CDpl us/06 0- 0050 CDpl us Anlag enst eue run g-- -- --- --- -- --- -- --- --- -- --- -- --- -- --- --- -- -- @ 8\m od_ 130 950 863 486 7_6 8.docx @ 4 685 6 @ 2 @ 1
6.5 CD
plus
control system
The control system CD
plus
(“Concentrator Display plus”) stands for a
convenient user interface for the intuitive control of evaporation processes
under rotation.
Pos: 135 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 136 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /06 0 Betri eb/CDpl us/06 0- 0050 -00 10 Bedie nob erfläc he (au ßer 2- 18) @ 8\ mod _13 095 086 352 89_ 68.d ocx @ 468 64 @ 3 @ 1
6.5.1 User interface
1 Left function key
2 Right function key
3 "Up" key
4 "Down" key
5 Display
Fig. 18: User interface of the CD
plus
control system
Function keys (1+2)
The function of these keys depends on the menus and operating states of
the installation. The current key function is displayed in the black field next
to the key.
Fig. 19: Display of the assignment of the function keys; here: left key "mode",
right key "menu"
Up and down keys (3+4)
These keys are used to select the available functions and values or to
change the selected parameter values.
Display (5)
The main window of the display is divided into three areas: the values
windows, the assignment of the function keys and the status bar. The main
window shows the process data, e.g. set values and actual values, menues
and process-relevant information (see figure).
6 Values window
7 Assignment of the
function keys
8 Status bar
Fig. 20: Structure of the CD
plus
display