Martin Christ RVC 2-25 CDplus - Manual (Page 48)

RVC 2-25 CD&
6 Operation
48
Version 11/2008, Rev. 2.2 of 04/12/2013 • sb
Translation of the original operating manual
In addition, the menu can be opened at any time to check whether any
messages are pending.
NOTE
A detailed list of all messages can be found in chapter 7 "Malfunctions and
error correction".
Information status
Every piece of information shown in the process & equipment information
window receives a certain status:
Information present, not acknowledged
Information present, acknowledged
Error no longer present, information not acknowledged
The sound signal continues until all the information is acknowledged.
Once some information is no longer present but has been acknowledged,
the information will be removed from the process & equipment information
window.
In order to quit the process & equipment information window, you have to
acknowledge all of the pieces of information so that the left-hand function
key "back" can be displayed.
Pos: 151 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 152 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /06 0 Betri eb/CDpl us/06 0- 0050 -00 30 -005 0 O ptio nen (au ße r 2- 18) @ 8\ mo d_1 3099 358 667 00_ 68.d ocx @ 471 22 @ 4 @ 1
6.5.3.5 Options
Fig. 41: Menu “Options”
Change display conrast
• Select the menu "Change display contrast".
• Change the contrast by pressing the up/down keys.
• Confirm the new setting by pressing the right-hand function key.
Fig. 42: Changing the contrast
Select language
The CD
plus
control system can be used in German or English.
• Select the menu "Select language".
• Select the language using the up/down keys.
• Confirm the input by pressing the right-hand function key.