How to replace the filter pack cartridge, Ion how, To replace the filter pack cartridge – Labconco WaterPr BT Systems 90153 Series User Manual
Page 47
39
How to Replace the Filter Pack Cartridge
ATTENTION
Open the Tank Outlet Valve before installing a new Filter Pack cartridge. This
keeps the tank from filling until the Filter Pack cartridge is rinsed out (A).
HAZARD
Do not touch the UV Lamp when replacing the Filter Pack cartridge.
Removing the Filter Pack
A
•
Open the front cover to go into STANDBY mode (this may require
removal of the final filter). Wait for the system to depressurize. The
Display will show STANDBY blinking for 10 seconds.
•
Remove the Final Filter.
B
•
Press your thumbs on the system. Swing the pack towards you.
C
•
Remove the pack from the system.
This manual is related to the following products: