Installation of the vent filter, Installation of the clear tubing, Ion installation of the – Labconco WaterPr BT Systems 90153 Series User Manual
Page 25: Vent filter), Installation
17
Installation of the Vent Filter
A
•
Obtain the Vent Filter.
•
Insert the Vent Filter firmly into the port (A, B).
B
Installation of the Clear Tubing
C
•
Locate the clear Clear Tubing and the Barbed Fitting from the
Accessories Bag.
•
Screw the Barbed Fitting onto the bottom end of the POU
Dispenser (C).
D
•
Push one end of the Clear Tubing onto the end of the Barbed
Fitting (D). Place the other end of the Clear Tubing in a sink.
ATTENTION
Do not use any white tape on the threads of the Barbed Fitting. An O-ring is
located inside the POU Dispenser to ensure water tightness between the
threads of the POU Dispenser and the Barbed Fitting.
This manual is related to the following products: