Labconco WaterPr BT Systems 90153 Series - Manual (Page 37)

Using the WaterPro® BT System
29
3 Press the Dispensing Button once. The
system will dispense water. The Display
will show the amount of water
dispensed and the Product resistivity.
NOTE: To stop dispensing water, press
the Dispensing Button once again.
4 To exit the menu, press and hold the
Main Button for 2 seconds.
To display the next menu option, press
the Main Button once.
The WaterPro® BT water systems have been designed to operate permanently
connected to feed water, plugged to an electric power source and in regular
operating mode. Do not unplug the WaterPro® BT system except when required by
the user manual for maintenance purposes. Do not place the system in STANDBY
mode except when maintenance needs to be performed.
ATTENTION