Labconco WaterPr BT Systems 90153 Series User Manual
Page 19
11
2
For system installed under a counter pass the tubing through a hole
provided in the counter.
•
Cut the tie wrap attaching the tubing and cables.
•
Connect the tubing from the remote dispenser to the water system:
black tubing to the black tubing, and transparent tubing to the
transparent tubing.
3
•
Connect the 2 electrical connectors (Molex + Picoflex) to the PC
Board.
4
•
Make sure the system operates correctly before installing the cover
panel. (It will not be possible to remove once attached).
5
•
Install the cover panel.
6
•
Secure the cover with screw provided by inserting the screw through
the top of the cover and tightening it to the top of the panel.
This manual is related to the following products: