Labconco WaterPr BT Systems 90153 Series User Manual
Page 20
12
Connection of the Power Cord − Turning on the System Power
A
•
Open the front cover of the system (A) – this may require removal of
the final filter. This will allow the system to go into STANDBY mode
once the system is powered.
B
•
Plug the Power Cord into the system (B).
•
Plug the other end of the Power Cord into an appropriate source of
electrical power (i.e. wall outlet).
•
Open the Feedwater Supply Valve.
Start-up Displays
C
•
Once the system is powered, the system will start to display
information before going into STANDBY mode (C).
This manual is related to the following products: