Labconco Biological Safety Cabinets 30468 Series - Manual (Page 14)

Product Service 1-800-522-7658 8
Original instructions
Chapter 3:
Getting Started
Now that the installation is properly prepared, you are ready to inspect,
install, and certify the Axiom biosafety cabinet. This chapter covers how to:
 Unpack and move the biosafety cabinet.
 Install the cabinet.
 Connect the electrical supply source.
 Connect the service lines.
 Connect to an exhaust system (optional).
 Arrange certification of the biosafety cabinet.
Tools required for installation the biosafety cabinet include two 1/2"
wrenches, a flat-blade screwdriver, a #2 Phillips screwdriver, and a
carpenter’s level.
Note: The biosafety cabinet models weigh between 630–900 lbs. (286-408
kg). The shipping pallet allows for lifting with a mechanical lift truck or
floor jack.