EXFO FPM-600 Power Meter - Manual (Page 73)

Power Meter/Light Source/Optical Loss Test Set 67
A Technical Specifications
FPM-600
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
ORDERING INFORMATION
SPECIFICATIONS a
Model FPM-602 FPM-602X
Detector Ge GeX
Power range (dBm) b 10 to –70 26 to –55
Wavelength range (nm) 800 to 1650 800 to
1650
Calibrated wavelengths (nm)
800, 820, 830, 840, 850, 860, 870, 880, 910, Same calibrated
980, 1270, 1280, 1290, 1300, 1310, 1320, wavelengths as the
1330, 1340, 1350, 1370, 1390, 1410, 1430, FPM-602, plus 1060
1450, 1460, 1470, 1480, 1490, 1500, 1510,
1520, 1530, 1540, 1550, 1560, 1570, 1580,
1590, 1600, 1610, 1620, 1630, 1640, 1650
Power uncertainty c ±5 % ± 0.1 nW ±5 % ± 3 nW
Resolution (dB) ±0.01 (10 dBm to –60 dBm) ±0.01 (26 dBm to –45 dBm)
Automatic offset nulling d Yes Yes
Display units dB, dBm, W dB, dBm, W
Tone detection 270 Hz, 1 kHz and 2 kHz 270 Hz, 1 kHz and 2 kHz
Auto-switching e Yes Yes
Warm-up period (min) f 0 0
Data storage (items) more than 1000 more than 1000
Battery life (hours) (typical) 72 72
Warranty and recommended
recalibration interval (years)
3 3
NOTES
a. Guaranteed unless otherwise specified. All specifications valid
at 1550 nm and 23 °C ± 1 °C, with an FC connector.
b. In CW mode; sensitivity defined as 6 x rms noise level.
c. For calibrated wavelengths. Valid up to 20 dBm for
FPM-602X.
d. For power > –40 dBm for FPM-602, and > –25 dBm
for FPM-602X.
e. At 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm
and 1650 nm; for power > –50 dBm for FPM-602 and
> –40 dBm (typical) for FPM-602X.
f. For a variation of ) 0.06 dB at power levels * –40 dBm
for FPM-602 and * –25 dBm for FPM-602X.
GENERAL SPECIFICATIONS
Size (H x W x D) 190 mm x 100 mm x 62 mm (7 1 / 2 in x 4 in x 2 1 / 2 in)
Weight 0.48 kg (1.1 lb)
Temperature operating –10 °C to 50 °C (14 °F to 122 °F)
storage –40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity 0 % to 95 % non-condensing
STANDARD ACCESSORIES
User guide, Certificate of Calibration, instrument stickers
in six languages, AC adapter/charger, lithium ion battery,
shoulder strap, carrying case, USB cable.