EXFO FPM-600 Power Meter - Manual (Page 48)

Saving and Recalling Power/Loss Values
42 FPM/FLS/FOT-600
Saving, Recalling and Deleting Data
To delete a single saved value from the unit:
1. From normal operating mode, hold down
for a few seconds. The Recall indicator
is displayed with the cable name, then the
last saved value and its fiber ID.
2. When fiber ID is displayed, hold down
a few seconds to return to the cable name
list. Select the cable in which you want to delete saved data by using
and to move forward or backward. The last saved value in
the selected cable and its fiber ID will be displayed after 3 seconds.
3. Select the value to delete by using and to move forward or
backward in saved data.
4. Hold down a few seconds. The unit displays “dEL”, then displays
another saved data.
5. Press to return to normal mode.
To delete a cable name:
1. From normal operating mode, hold down
a few seconds. The Recall indicator is
displayed with the last cable name, then the
last saved value and its fiber ID.
2. When fiber ID is displayed, hold down
for a few seconds to return to the cable
name list, then, select the cable you want to delete by using
and
to move forward or backward.
3. Hold down a few seconds. The unit displays “dEL”, then displays
another cable name.
4. Press to return to normal mode.