EXFO FLS-5800 CD/PMD Analyzer Source User Manual
Page 51
Troubleshooting
45
CD/PMD Analyzer Source Error Messages
-76
Thermo-electric cooler over-current:
A problem occurred with the current
going to the thermo-electric cooler.
Call EXFO for assistance.
-79
EEPROM access error:
A problem occurred when accessing
the EEPROM memory (read or write).
Call EXFO for assistance.
100
No more room in the command pipe:
A command could not be added to
the command pipe.
If problem persists, call EXFO for
assistance.
101
Timeout error:
The command request was not
performed in the set time amount.
Call EXFO for assistance.
102
Runtime error:
The command was not performed by
the unit due to a runtime error.
Call EXFO for assistance.
103
Invalid response:
A command has triggered an invalid
response from the unit.
Call EXFO for assistance.
200
Decompression error:
An error occurred while
decompressing the software.
Call EXFO for assistance.
32244
Floating exception:
There is an overflow while running a
command.
Restart your unit to solve the
problem.
32245
Stack overflow:
Not enough RAM to run the
command.
Restart your unit to solve the
problem.
Warning/Error
Number
Description
Recommended Action