EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 11)

CD/PMD Analyzer Source 5
2 Safety Information
LED Safety Information
Your instrument is a Class 1M LED product in compliance with standard
IEC 60825-1 Amendment 2: 2001. Invisible LED radiation may be
encountered at the output port.
The product is safe under reasonably foreseeable conditions of operation
but it may be hazardous if you use optics within a diverging or collimated
beam. Do not view directly with optical instruments.
³
Wavelength: 1520 to 1640 nm
³
Maximum output power at the connector: 10 mW
The unit has an active LED on its front panel. When lit, this LED indicates
that an optical signal is being emitted from the source port.
The active LED will turn on three seconds before the source starts emitting.
W
ARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
W
ARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.