beautypg.com

Recalibrating the unit – EXFO FLS-5800 CD/PMD Analyzer Source User Manual

Page 45

background image

Maintenance

CD/PMD Analyzer Source

39

Recalibrating the Unit

4. Insert the new fuses into the fuse holder.

5. Ensure the fuses are placed firmly in the holder before reinstalling it in

the unit.

6. Firmly push the fuse holder back into place.

Recalibrating the Unit

Manufacturing and service center calibrations are based on the
ISO/IEC 17025 Standard, which states that calibration documents must not
contain a recommended calibration interval, unless this has been
previously agreed upon with the customer.

Validity of specifications depends on operating conditions. For example,
the calibration validity period can be longer or shorter depending on the
intensity of use, environmental conditions and unit maintenance. You
should determine the adequate calibration interval for your unit according
to your accuracy requirements.

Under normal use, EXFO recommends calibrating your unit every year.

Fuse

Fuse holder