beautypg.com

Setting the remote command mode – EXFO FLS-5800 CD/PMD Analyzer Source User Manual

Page 29

background image

Controlling the Source Remotely

CD/PMD Analyzer Source

23

Setting the Remote Command Mode

Setting the Remote Command Mode

To remotely control the CD/PMD Analyzer Source, you must set a GPIB
address or activate the RS-232 port.

To set a remote command mode:
1.
Press the Setup key.

2. Use the up/down or left/right arrow keys to select RS232 / GPIB. The

current setting is displayed.

Note: If GPIB is currently selected and you want to specify a GPIB address, see

Setting the GPIB Address on page 24.

3. Press ENTER to access the RS232 / GPIB edit box.

4. Use the up/down arrow keys to toggle between GPIB and RS232.

5. Press ENTER to confirm.

If you selected RS232, the GPIB Addr. menu option is deactivated (N.A. is
displayed).

If you selected GPIB, the Baud Rate and Flow Ctrl menu options are
disabled (N.A.is displayed). If necessary, you can change the GPIB address.

Refresh Rate

Backlight

Contrast
Video Mode

Exit

8 Hz

ON

STD

RS232 / GPIB

GPIB Addr.

Baud Rate
Flow Ctrl

GPIB

12

N.A.
N.A.