beautypg.com

EXFO ETS-1000 User Manual

Page 89

background image

Configuring and Starting a Test

Ethernet Tester Analyzer

81

ET Discovery

To receive data about remote unit and to switch loopback on:

Connect the unit to a network.

In IP field, enter IP address of remote unit.

Press

(Discovery) button.

If discovery is successfully completed, IP address, host name and MAC
address will be represented on the screen. Loopback menu item will
become accessible for editing.

Buttons for loopback level selection are described below:

: switch off loopback mode.

: switch on loopback at the data link layer.

: switch on loopback at the network layer.

: switch on loopback at the transport layer.

Note: To transmit data UDP protocol is used. Number of server UDP port is

0×8018. Number of client UDP port is 0Ч8019.