EXFO ETS-1000 - Manual (Page 123)

Ethernet Tester Analyzer 115
8 Saving Test Results
In the RFC 2544, BERT and Packet jitter tests modes, ETS-1000 analyzer
supports viewing information about previously saved measurement results
(
), saving test settings and results ( ), and loading previously
saved test configurations and results ( ). To perform any of these
operations, while in the RFC 2544 testing mode, press button (Data) to
switch to the corresponding menu.
To save the data:
1. Select a number you want to save the entry with.
2. Press .
3. Enter a name for the entry to save.
4. Press .
5. Press (Save).
To load previously saved test results and settings:
1. Select the number of an entry.
2. Press (Load).