beautypg.com

4 setting up your unit, Network setup, 4setting up your unit – EXFO ETS-1000 User Manual

Page 25

background image

Ethernet Tester Analyzer

17

4

Setting up your Unit

You can configure the network, test interface, and other unit settings for
your ETS-1000 analyzer before testing.

Network setup

Configure the Network parameters from the Network setup menu as
explained below.

Port A:

Port: select port (A, B, or LAN).

DHCP: if enabled, all parameters (IP address, subnet mask, gateway IP
address, and the DNS server IP address) are provided automatically by
the DHCP server.

IP address: port IP address.

Subnet Mask: specifies which part of the IP address is the network
address and which part is the host address.

Gateway: gateway IP address.