beautypg.com

EXFO ETS-1000 User Manual

Page 86

background image

Configuring and Starting a Test

78

ETS-1000

OAM

Mode: Select Mode for OAM configuring. The available OAM states are:

Active: In active mode, the selected port can send commands to
locate remote unit, to enable the Loopback mode on the remote
unit, and to respond to the Ethernet OAM commands from the
remote unit.

Passive: In passive mode, the port can only respond to the
Ethernet OAM commands from the remote unit, but cannot initiate
the Loopback mode.

Off: OAM disabled.

Discovery: Select the state of locating the remote unit. Available states
are:

Fault

Send local

Passive wait

Send loc/rem

Send loc/rem ok

Send any

Remote unit: Press to switch to the Remote unit screen.

MAC address: MAC-address of a remote unit