beautypg.com

EXFO ETS-1000 User Manual

Page 126

background image

Remote Control

118

ETS-1000

Management in the Terminal Mode

3. If you use HyperTerminal utility, perform the following steps:

3a. Create new connection (File New Connection menu).

3b. In the Connection Description dialog box, enter a name and

choose an icon for the connection. Click OK.

3c. In the Connect To dialog box, choose the COM port of the PC that

ETS-1000 is connected to. Click OK.

3d. Set the following properties of the COM-port:

Bits per second - 57600

Data bits - 8

Parity - None

Stop bits - 1

Flow control - None

3e. Click OK, and HyperTerminal utility will attempt to connect to

ETS-1000. To check the connection, type AT command; the unit
should respond with OK.

When successfully connected, user can manage the analyzer using
commands described in Remote Control Commands on page 141.