EXFO AXS-200/650 IP Triple-Play Test Set - Manual (Page 22)

Connection Setup for IP Triple-Play Verification Tests
16 AXS-200/650
Setup Line Connection
To select the LAN parameters to configure:
1. From the Connection Setup pane, press the left/right function arrows
until the LAN Setup tab is displayed.
2. Press the F1, F2, or F3 key located just below the tab to select it.
3. Press the up/down arrows to select the desired parameter.
4. Press to open the list or modify the parameter.
5. In the list, press the up/down arrows to select the function or mode.
OR
Use the alphanumeric keypad to enter the value you want to specify.
6. Press to confirm the selection.