Eurocom M7X1CUH LYNX - Manual (Page 145)

Modules & Options
3.75G/HSPA Module 7 - 37
7
HSPA Modem Interface
With the 3.75G/HSPA module and USIM card (supplied by your service provider)
installed you may then install the HSPA Modem Interface. The HSPA Modem In-
terface allows you to directly access your HSPA internet service from the computer.
HSPA Modem Interface Installation
1. Enable power to the module by pressing the Fn + key combination (give
the module about 10 seconds to power on and the on-screen icon will indi-
cate the module’s power status).
2. If a Found New Hardware window appears, click Cancel in all windows
that appear, and then proceed to install the driver as below.
3. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
4. Click Option Drivers (button).
5. Click 3.Install 3G Driver > Yes.
6. Click Next > Install.
7. Click Finish to restart the computer.
8. Access the HSPA Modem Interface from the Start menu (Start > Pro-
grams/All Programs > HSPA modem), or by double-clicking the HSPA
modem icon on the desktop.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see
Table 1
- 6, on page 1 - 13 / Table 1
- 4, on page 1 - 9 ).