Eurocom M7X1CUH LYNX - Manual (Page 142)

Modules & Options
7 - 34 3.75G/HSPA Module
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
key combination (see “Function/Hot
Key Indicators” on page 1 - 13 ) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA module is powered on, the on-screen indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
Table 4 - 1, on
page 4 - 3 . Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page 7 - 37 for driver installation information and “HSPA Modem Interface”
on page 7 - 38 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
46 for driver installation information and “Mobile Partner Application” on
page 7 - 47 for instructions on using the Mobile Partner application.
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.