Eurocom M7X1CUH LYNX - Manual (Page 106)

Upgrading The Computer
6 - 10 Upgrading the System Memory (RAM)
6
3. Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4. Carefully disconnect the fan cable , and remove the cover .
Fan Cable & Cover
Make sure you recon-
nect the fan cable
before screwing down
the bay cover. Note the
information on replacing
the RAM & CPU bay
cover in
“Cover Pins”
on page 6 - 12 .
Contact Warning
Be careful not to touch
the metal pins on the
RAM module’s connect-
ing edge. Even the
cleanest hands have
oils which can attract
particles, and degrade
the module’s perfor-
mance.
Figure 6 - 8
CPU/RAM Bay
Cover Removed
4
4 5
5
4
5
4
Model B
Model A