Eurocom M7X1CUH LYNX - Manual (Page 137)

Modules & Options
PC Camera Module 7 - 29
7
BisonCap
BisonCap is a video viewer for general purpose video viewing and testing, and for
capturing video files to .avi format.
1. Run the BisonCap program from the Start > Programs/All Programs > Bison-
Cam menu (it is recommended that you set the capture file before the capture
process - see Set Capture File below).
2. Go to the Capture menu heading (if you wish to capture audio check “PC Camera
Audio Setup” on page 7 - 27 ) and select Start Capture.
3. Click OK (the file location will be displayed in the pop-up box) to start capturing the
video, and press Esc to stop the capture (you can view the file using the Windows
Media Player).
Set Capture File
Prior to capturing video files you may select the Set Capture File... option in the
File menu, and set the file name and location before capture (this will help avoid ac-
cidentally overwriting files). Set the name and location then click Open, then set the
“Capture file size:”
and click OK. You can then start the capture process as above.
Note the important information in “Reducing Video File Size” on page 7 - 30 in
order to save file space, and help prevent system problems.
Pre-Allocating File
Space
You may pre-allocate the
file size (File > Allocate
File Space) for the cap-
ture file in the BisonCap
program.
Pre-allocating space on
the hard disk can improve
the capture quality (par-
ticularly of large capture
files), by reducing the
amount of work the hard
disk has to do in finding
space for the video data
as it is being captured.
See also “Reducing Vid-
eo File Size” on page 7 -
30
.