beautypg.com

Power on beep (advanced menu), Card reader: (advanced menu), Raid/ata mode select: (advanced menu) – Eurocom D900T PHANTOM User Manual

Page 98: Display time on led (advanced menu), Power on beep (advanced menu) -10, Bios (see, Display time on led (advanced menu)” on, Raid/ata mode select: (advanced menu)” on

background image

BIOS Utilities

5 - 10 Advanced Menu

5

Power On Beep (Advanced Menu)

Use this menu to enable/disable the single beep sound at the end of the POST.
This item is “Disabled” by default.

Card Reader: (Advanced Menu)

This option allows you to enable/disable support for the 10-in-1 Card Read-
er
. and is “Enabled” by default. However if you are installing an operating
system (e.g. Windows XP
) it is recommended that you disable the card
reader, as otherwise the card reader slots will automatically be defined as
drives “C:” through “F:” (your hard disk drive will then be defined as
drive “G:” etc.)
. If you set this option to “Disabled” in order to install the op-
erating system, don’t forget to reset the option to “Enabled” after you have in-
stalled the operating system.

RAID/ATA Mode Select: (Advanced Menu)

Configure your hard disk(s) in ATA or RAID mode here. Setup according to
the instructions in

“ATA Mode Configuration” on page 4 - 2

or

“RAID Mode

Configuration” on page 4 - 6

.

Display Time on LED (Advanced Menu)

This option allows you to toggle the time display on the Audio "DJ" LED dis-
play.