Drivers & utilities 4 - 4 ata mode configuration, Figure 4 - 2, Bios boot menu – Eurocom D900T PHANTOM User Manual
Page 68
Drivers & Utilities
4 - 4 ATA Mode Configuration
4
6.
Select the CD-ROM/DVD-ROM as the first device in the "Boot priority order" by pressing the <Shift>
and <+> keys to move the CD-ROM/DVD-ROM to the top of the order.
7.
Insert the Microsoft Windows XP OS CD/DVD into the CD/DVD drive.
8.
Make sure that the computer is connected to the AC power source, and press F10 to save the changes,
and exit the BIOS.
9.
Press a key when you see the message "Press any key to start up from the CD/Press any key to boot
from CD".
10. Press the F6 key when you see the message “Press F6 if you need to install third party SCSI or RAID
driver”.
11. When the Windows Setup menu appears, press the <S> key to "Specify Additional Device".
12. Insert the ATA Driver Diskette into the external USB Floppy drive.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Exit
F1
Help
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
Select Menu
Enter
Select
Sub-Menu
F10
Save and Exit
Item Specific Help
Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
the device fixed or
removable.
the device to boot.
disables a device.
<1 - 4> Loads default
boot sequence.
Boot priority order:
1:
IDE 0:
TOSHIBA DVD-ROM SD-C2612-
2:
USB FDC
Y-E DATA USB-FDU-(USB)
3:
PCI SCSI: FT TX
Ary 1
4:
IDE 1:
5:
6:
7:
8:
Excluded from boot order:
: USB HDD
: USB CDROM
Boot
Figure 4 - 2
BIOS Boot Menu