The power-on self test (post), The power-on self test (post) -2, Bios utilities 5 - 2 the power-on self test (post) – Eurocom D900T PHANTOM User Manual

Page 90: Figure 5 - 1

BIOS Utilities

5 - 2 The Power-On Self Test (POST)

The Power-On Self Test (POST)

Each time you turn on the computer, the system takes a few seconds to con-
duct a POST, including a quick test of the on-board RAM (memory).

As the POST proceeds, the computer will tell you if there is anything wrong.
If there is a problem that prevents the system from booting, it will display a
system summary and prompt you to run Setup.

If there are no problems, the Setup prompt will disappear and the system will
load the operating system. Once that starts, you can’t get into Setup without
rebooting.

POST Screen

1.BIOS information
2.CPU type
3.Memory status
4.Enter Setup prompt

appears only during
POST

Note: The POST
screen as pictured is
for guideline purposes
only. The POST
screen on your compu-
ter may appear slightly
different.

Figure 5 - 1

POST Screen

Phoenix cME FirstBIOS Notebook Pro

BIOS Revision: V133 1.00.E08

KBC/EC Firmware Revision: 1.00.E5

VBIOS Revision: VER008.017M.202-000-2004/06/07

CPU = Intel(R) Pentium(R) 4 CPU 3.20GHz

255M System RAM Passed

1024K Cache SRAM Passed

System BIOS shadowed

Video BIOS shadowed

ATAPI CD-ROM: QSI CD-RW/DVD-ROM SBW242B

USB: Y-E DATA USB-FDU

Mouse intialized

Press to enter SETUP