Eurocom M620NC TITANIUM - Manual (Page 88)

Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive
6
Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" or 1.8" Parallel (PA-
TA) hard disks with a height of 9.5mm (h) (see
“Storage” on page C - 3 ). Follow
your operating system’s installation instructions, and install all necessary drivers
and utilities (see
“Driver Installation” on page 4 - 5 ), when setting up a new hard
disk.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove the screws from points - .
HDD System
Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 2
Hard Disk Cover
Screws
1 3
1
3
2