Eurocom M620NC TITANIUM - Manual (Page 54)

Power Management
3 - 8 Configuring the Power Button
3
Configuring the Power Button
The power button may be set to send the computer in to either Stand by or Hiber-
nate mode (
Figure 3 - 3 ). In Stand by mode, the LED will blink green. In Hi-
bernate mode the LED will be off. If you are in a power saving mode set to save
power through individual components (e.g. hard disk, monitor), the LED will remain
green.
Figure 3 - 3
Power Options
(Advanced - Power
Buttons)
(Sleep) Button
Sleep Button
You may also configure the Sleep/Resume key combination (Fn + F1) from the menu illus-
trated in
Figure 3 - 3 . In Windows this is referred to as the Sleep button.
Power Button Sleep/Resume Lid