Eurocom M620NC TITANIUM - Manual (Page 132)

Intel Video Driver Controls
B - 8 Display Modes
B
To Enable Intel(R) Dual Display Clone Mode OR Twin Mode
1. Attach your external display to the external monitor port and turn it on.
2. Open the Intel(R) GMA Driver for Mobile control panel (see “Intel Graphics
Properties” on page B - 3 ).
3. Click to choose Intel(R) Dual Display Clone or Twin from Display Devices (tab).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.
Twin Mode Support
The Twin mode option
will only appear if the
notebook and external
monitor support the
same resolution (e.g.
1280 * 800). Check any
documentation supplied
with an external monitor
to see supported resolu-
tions.
Figure B - 6
Display Devices &
Settings
Clone Mode
Twin Mode