Echelon i.LON 1000 Internet Server - Manual (Page 14)

10
i .LON 1000 Internet Serve Starter Kit
Software Step-by-Step Installation
Follow these steps to install your software.
1
Connect to the
i
.LON 1000 console application using Hyperterminal.
a) Using the null-modem cable (not pictured in the above diagrams) that
shipped with the
i
.LON 1000, connect an available COM port on your PC to
the
i
.LON 1000 console port. Be sure that a modem driver, palm organizer
driver, or other serial device is not already using the COM port you choose on
your PC.
b) Run Hyperterminal on your PC. (Hyperterminal ships with Windows and
can usually be found under START | PROGRAMS | ACCESSORIES |
COMMUNICATION | HYPERTERMINAL. See Microsoft Windows help or
your system administrator for complete information on using the
Hyperterminal program.)
c) When Hyperterminal starts, it will prompt you for a Connection
Description. Type a descriptive name such as “ilon” for the connection
description and click OK.
d) After you have provided the connection description name from step c,
Hyperterminal’s Connect To dialog box will appear. This dialog allows you
to choose the COM port you will use. Select the COM port that you
connected the null-modem cable to.