Shut down, Rt100 powershift operator’s manual – Ditch Witch RT100 User Manual
Page 73
Drive - 72
RT100 Powershift Operator’s Manual
Shut Down
CMW
Shut Down
1.
When job is complete, press service brake.
2.
Move F-N-R lever to neutral and move ground drive speed/direction hand control to neutral.
3.
Tilt steering column up.
4.
Engage parking brake and verify parking brake indicator is on.
5.
Release service brake.
6.
Lower all attachments to ground and let machine idle for three minutes to cool.
7.
Turn ignition switch to STOP. If leaving machine unattended, remove key.
8.
For maintenance or storage, turn battery disconnect switch to disconnect position.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)