Ditch Witch RT100 - Manual (Page 106)

RT100 Powershift Operator’s Manual
Service - 105
Recommended Lubricants/Service Key
Recommended Lubricants/Service Key
Item Description
Tier 4i
DEO
Diesel engine oil meeting or exceeding Deutz specification DQC III- LA.
NOTICE: Shipped from factory with API CJ-4 DEO meeting Deutz specification DQC II-
LA. Change oil initially at 250 hours.
• Engine must use low sulfated ash, phosphorous, and sulfur (low SAPS) oil.
• See viscosity chart.
• If oils meeting only API CJ-4 or ACEA E6/E9 are used, service interval is reduced
to 250 hours.
Tier 3
DEO
Diesel engine oil meeting or exceeding Deutz specification DQC III.
NOTICE: Shipped from factory with API CJ-4 DEO meeting Deutz specification DQC II-
LA. Change oil initially at 100 hours if fuel sulphur content exceeds 500 ppm (500 mg/
kg). Otherwise, initial oil change should be at 250 hours.
• See viscosity chart.
• If oils meeting only API CJ-4 or ACEA E7 are used, service interval is reduced to
250 hours.
MPG Multipurpose grease meeting ASTM D217 and NLGI 5
EPG Extreme pressure grease meeting ASTM D217 and NLGI 5
MPL Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
THF Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor
Hydraulic Fluid, Texaco TDH Oil, or equivalent
BRAKE Brake fluid meeting or exceeding DOT 3 specifications
PTF Powershift transmission fluid: Phillips 66 Torque Fluid high-performance, multipurpose,
heavy-duty torque converter fluid for use in off-highway powershift transmissions
DEAC Diesel engine Antifreeze/Coolant meeting ASTM specification D6210
Check level of fluid or lubricant
Check condition
Filter
Change, replace, adjust, service, or test