Rt100 powershift operator’s manual – Ditch Witch RT100 User Manual
Page 125
Service - 124
RT100 Powershift Operator’s Manual
250 Hour
Engine Oil and Filter Change (Tier 4i)
Change engine oil and filter every 250 hours
when using motor oils meeting only API CJ-4 or
ACEA E6/E9. See page 104 for more information
about DEO specifications.
To change:
1.
While oil is warm, remove drain plug (1).
Drain oil and replace plug.
2.
Remove filter (2) and replace with new filter
each time oil is changed. Add DEO at fill neck
(3).
Adjust Service Brake
Adjust service brake after 250 hours of operation.
When properly adjusted, there is 1/4-1/2" (6-13
mm) free play in pedal.
Lube Driveshaft U-joints
Lube driveshaft U-joints every 250 hours with 3-4
shots of EPG.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)