Bonaire LV - Manual (Page 37)

Multi-Appliance Manual Control
Controls – Installation / Setup / Commissioning
†
Fan speed set is correct.
†
Burner pressure is correct.
†
Mounting pad/platform complies with requirements / codes.
U NIT – D UAL C YCLE R EFRIGERATED A IR C ONDITIONING
†
Unit Foundation correct
†
All pipe work is welded and vacuumed down.
†
Condenser Coil is purged before charging.
†
System is charged, all joints checked and pressures set correctly
†
Condenser unit is level
†
All clearances around the condenser set to manufacturer's specifications.
D UCTWORK
†
All ductwork is completed to plan, correctly supported and airtight, with no bend less than 1.5
x the ductwork diameter.
†
Air distribution checked, dampers are adjusted and all outlets correctly adjusted and wiped
clean.
†
All roof penetrations are fully sealed and watertight.
†
Man hole cover replaced.
S ITE
†
All rubbish has been removed from inside and on the roof.
C USTOMER H AND O VER
†
The operation of the Controller.
†
The need to open windows and doors for the correct operation of Evaporative Air
Conditioning
†
The operation of the bleed or dumping system and it’s importance to operate at all times in a
ducted evaporative air conditioner.
†
Maintenance requirements
Bonaire Control Systems Page 37