Bonaire LV - Manual (Page 22)

Multi-Appliance Manual Control
Dual Cycle – Refrigerated Air Conditioning
F AN O PERATION
There are 2 modes for operating the fan with dual cycle refrigerated cooling.
• Auto – The fan runs with condenser only. This means when the control reaches temperature
the fan will turn off with condenser. The display will indicate the snow flake when the unit is
running.
• Continuous – The fan runs continuously and the condenser cycles ON and OFF. In this
mode the fan will only shut off when the control is in the OFF mode. The display will show the
snow flake when the condenser is on plus the fan symbol. The snow flake will cycle on and
off with the condenser.
To change the fan mode operation:
STEP 1 Ensure the unit is turned on.
STEP 2 Using the MODE button toggle through the
available modes until you have COOL by itself
(Auto)
or
Using the MODE button toggle through the
available modes until you have COOL with the fan
symbol (Continuous).
The snow flake will only show if the SET TEMP is
lower than the ROOM TEMP.
Bonaire Control Systems Page 22