ADLINK cPCI-6S10 User Manual
Page 83

Getting Started
73
cPCI-6S10
phy_port_primary_and_offset_ge23=0x1207
phy_port_primary_and_offset_ge0=0x0207
phy_port_primary_and_offset_ge1=0x0206
phy_port_primary_and_offset_ge2=0x0205
phy_port_primary_and_offset_ge3=0x0204
phy_port_primary_and_offset_ge4=0x0203
phy_port_primary_and_offset_ge5=0x0202
phy_port_primary_and_offset_ge6=0x0201
phy_port_primary_and_offset_ge7=0x0200
# 54685 phy address
port_phy_addr_ge16=0x11
port_phy_addr_ge17=0x12
port_phy_addr_ge18=0x13
port_phy_addr_ge19=0x14
port_phy_addr_ge20=0x15
port_phy_addr_ge21=0x16
port_phy_addr_ge22=0x17
port_phy_addr_ge23=0x18
# 84752 phy address
phy_84752=1
phy_ext_rom_boot=0
port_phy_addr_xe0=0x3e
port_phy_addr_xe2=0x3f
The script "/etc/init.d/S70bcm" controls the execution of the BCM
shell. "/etc/init.d/S70bcm start" launches the shell in background.
This is done automatically every time the cPCI-6S10 boots up.
"/etc/init.d/S70bcm stop" stops the BCM shell.
The commands in the BCM shell are classified into two categories:
general commands for shell and commands for controlling the
Ethernet switch. Refer to the cPCI-6S10 Software User's Manual
for information on the commands used on the cPCI-6S10.